• AD4001BRMZ
Срок поставки и цена – по запросу

The AD4001 is a low noise, low power, high speed, 16-bit, 2 MSPS, precision successive approximation register (SAR) analog-to- digital converter (ADC). It incorporates ease of use features that lower the signal chain power, reduce signal chain complexity, and enable higher channel density. The high-Z mode, coupled with a long acquisition phase, eliminates the need for a dedicated high power, high speed ADC driver, thus broadening the range of low power precision amplifiers that can drive this ADC directly, while still achieving optimum performance. The input span compression feature enables the ADC driver amplifier and the ADC to operate off common supply rails without the need for a negative supply while preserving the full ADC code range. The low serial peripheral interface (SPI) clock rate requirement reduces the digital input/output power consumption, broadens processor options, and simplifies the task of sending data across digital isolation. Operating from a 1.8 V supply, the AD4001 has a ±VREF fully differential input range with VREF ranging from 2.4 V to 5.1 V. The AD4001 consumes only 16 mW at 2 MSPS with a minimum SCK rate of 70 MHz in turbo mode and achieves ±0.4 LSB integral nonlinearity error (INL) maximum, guaranteed no missing codes at 16 bits with 96.2 dB typical signal-to-noise ratio (SNR). The reference voltage is applied externally and can be set independently of the supply voltage. The SPI-compatible, versatile serial interface features seven different modes including the ability, using the SDI input, to daisy-chain several ADCs on a single 3-wire bus and provides an optional busy indicator. The AD4001 is compatible with 1.8 V, 2.5 V, 3 V, and 5 V logic, using the separate VIO supply. The AD4001 is available in a 10-lead MSOP or a 10-lead LFCSP with operation specified from −40°C to +125°C. The device is pin compatible with the AD4003 18-bit, 2 MSPS, precision SAR differential ADC. Applications Automatic test equipment Machine automation Medical equipment Battery-powered equipment Precision data acquisition systems

rohs_statusCompliant
supply_voltage_dc1.71 V (min)
lead_free_statusContains Lead
sample_rate2.00 MHz
lifecycle_statusActive
number_of_bits16
pin_count10
Resolution (Bits)16bit
Sampling Rate2MSPS
Supply Voltage TypeSingle
Supply Voltage Min1.71V
Supply Voltage Max1.89V
ADC / DAC Case StyleMSOP
No. of Pins10Pins
Input Channel TypeDifferential
Data InterfaceSerial, SPI
Operating Temperature Min-40°C
Operating Temperature Max125°C
PackagingEach
Product RangeSAR 16-bit ADCs
Automotive Qualification Standard-
RoHS Phthalates CompliantYes
MSLMSL 1 - Unlimited
SVHCNo SVHC (07-Jul-2017)
Показать остальные свойства..

Аналоги