| Срок поставки и цена – по запросу | |
The AD596/AD597 is a monolithic temperature setpoint controller which has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal signal proportional to temperature. The internal signal is then compared with an externally applied setpoint voltage to yield a low impedance switched output voltage. Dead-Band or switching hysteresis can be programmed using a single external resistor. Alternately, the AD596/ AD597 can be configured to provide a voltage output (10 mV/°C) directly from a type J or K thermocouple signal. It can also be used as a stand-alone voltage output temperature sensor. The AD596/AD597 can be powered with a single supply from +5 V to +30 V, or dual supplies up to a total span of 36 V. Typical quiescent supply current is 160 µA which minimizes self-heating errors. The AD596/AD597 H package option includes a thermocouple failure alarm that indicates an open thermocouple lead when operated in the temperature proportional measurement mode. The alarm output has a flexible format which can be used to drive relays, LEDs or TTL logic. The device is packaged in a reliability qualified, cost effective 10-pin metal can, 8-pin plastic mini-DIP or SOIC and is trimmed to operate over an ambient temperature range from +25°C to +100°C. Operation over an extended ambient temperature range is possible with slightly reduced accuracy. The AD596 will amplify thermocouple signals covering the entire -200°C to +760°C temperature range recommended for type J thermocouples while the AD597 can accommodate -200°C to +1250°C type K inputs. The AD596/AD597 has a calibration accuracy of ±4°C at an ambient temperature of 60°C and an ambient temperature stability specification of 0.05°C/°C from +25°C to +100°C. If higher accuracy, or a lower ambient operating temperature is required, either the AD594 (J thermocouple) or AD595 (K thermocouple) should be considered.
| supply_voltage_dc | 30.0 V, 30.0 V (max) |
| rohs_status | Compliant |
| reach_svhc_compliance | No SVHC |
| lead_free_status | Contains Lead |
| mounting_style | Surface Mount |
| quiescent_current | 300 µA |
| packaging | Tube |
| case_package | SOIC |
| supply_current | 300 µA |
| lifecycle_status | Active |
| output_voltage | 28.0 V |
| output_current | 5.00 mA |
| pin_count | 8 |
| Количество в упаковке | 1 |
| Корпус | SOIC-8 |
| Вес | 0.166 г |
| IC Output Type | Voltage |
| Sensing Accuracy Range | ± 4°C |
| Sensing Temperature Min | -40°C |
| Sensing Temperature Max | +125°C |
| Sensor Case Style | SOIC |
| No. of Pins | 8Pins |
| Supply Voltage Min | 5V |
| Supply Voltage Max | 30V |
| Packaging | Each |
| Product Range | AD597 Series |
| Automotive Qualification Standard | - |
| RoHS Phthalates Compliant | Yes |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (07-Jul-2017) |
| Base Number | 597 |
| Operating Temperature Max | 125°C |
| Operating Temperature Range | -40°C to +125°C |
| Output Current | 5mA |
| Output Voltage | 28V |
| Output Voltage per °C | 10mV/°C |
| Sensor / Transducer Type | Temperature |
| Supply Current | 160µA |
| Supply Voltage Range | 5V to 30V |
| Temperature Sensing Range | -40°C to +125°C |
| Termination Type | Surface Mount Device |
Показать остальные свойства..