• AD7266BSUZ
Срок поставки и цена – по запросу

The AD7266 is a dual, 12-bit, high speed, low power, successive approximation ADC that operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 2 MSPS. The device contains two ADCs, each preceded by a 3-channel multiplexer, and a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 30 MHz. The conversion process and data acquisition use standard control inputs allowing easy interfacing to microprocessors or DSPs. The input signal is sampled on the falling edge of CS; conversion is also initiated at this point. The conversion time is determined by the SCLK frequency. There are no pipelined delays associated with the part. The AD7266 uses advanced design techniques to achieve very low power dissipation at high throughput rates. With 5 V supplies and a 2 MSPS throughput rate, the part consumes 6.2 mA maximum. The part also offers flexible power/throughput rate management when operating in normal mode as the quiescent current consumption is so low. The analog input range for the part can be selected to be a 0 V to VREF (or 2 × VREF) range, with either straight binary or twos complement output coding. The AD7266 has an on-chip 2.5 V reference that can be overdriven when an external reference is preferred. This external reference range is 100 mV to VDD. Product Highlights Two Complete ADC Functions Allow Simultaneous Sampling and Conversion of Two Channels. Each ADC has three fully/pseudo differential pairs, or six single-ended channels, as programmed. The conversion result of both channels is simultaneously available on separate data lines, or in succession on one data line if only one serial port is available. High Throughput with Low Power Consumption. The AD7266 offers a 1.5 MSPS throughput rate with 11.4 mW maximum power dissipation when operating at 3 V. The AD7266 offers both a standard 0 V to VREF input range and a 2 × V input range. No Pipeline Delay. The part features two standard successive approximation ADCs with accurate control of the sampling instant via a CS input and once off conversion control.

Resolution (Bits)12bit
Sampling Rate2MSPS
Supply Voltage TypeSingle
Supply Voltage Min2.7V
Supply Voltage Max5.25V
ADC / DAC Case StyleTQFP
No. of Pins32Pins
Input Channel TypePseudo Differential, Single Ended
Data InterfaceSerial, SPI
Operating Temperature Min-40°C
Operating Temperature Max125°C
PackagingEach
Product RangeHex 12-Bit SAR ADCs
Automotive Qualification Standard-
RoHS Phthalates CompliantYes
MSLMSL 3 - 168 hours
SVHCNo SVHC (07-Jul-2017)
A/D / D/A FeaturesSerial SPI Interface, Microwire, DSP Compatible, Differential Input
Base Number7266
Conversion Time0.5µs
Data Rate2Mbps
IC Case StyleTQFP
IC Generic Number7266
Linearity Error ADC / DAC +1LSB
Linearity Error ADC / DAC -1LSB
Logic Function Number7266
No. of Bits12bit
No. of Channels2Channels
Operating Temperature Range-40°C to +125°C
Supply Current6.4mA
Supply Voltage Range2.7V to 5.25V
Supply Voltage Range - Analogue2.7V to 5.25V
input_capacitance30.0 pF
supply_voltage_dc2.70 V (min)
data_rate2.00 Mbps
mil_specNo
power_dissipation33.6 mW
reach_svhc_complianceNo SVHC
lead_free_statusContains Lead
mounting_styleSurface Mount
packagingTray, Bulk
case_packageTQFP
sample_rate2.00 MHz
supply_current6.40 mA
lifecycle_statusActive
number_of_bits12
rohs_statusCompliant
pin_count32
resolution_bits12.0
Показать остальные свойства..

Аналоги