• FPF2700MX
  • FPF2700MX
  • FPF2700MX
  • FPF2700MX
Срок поставки и цена – по запросу

The AccuPower™ FPF270X series is a family of current-limit load switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew-rate-controlled N-channel MOSFET and slew-rated turn-on to prevent power bus disturbances from being caused by "hot plugging" loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low-voltage logic-compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power-good pin. Each member of the FPF270X family serves a category of load-fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of excessive levels of power dissipation. FPF2700 responds to an overload condition that lasts longer than a fixed blanking period by turning off the load, followed by a retry after the auto-restart time. The FPF270X is available in a space-saving Pb and Halogen free, 8-lead MLP 3x3mm and SO8 packages.

number_of_outputs1
rohs_statusCompliant
reach_svhc_complianceNo SVHC
lead_free_statusLead Free
mounting_styleSurface Mount
packagingCut Tape (CT)
input_voltage_dc36.0 V
lifecycle_statusActive
pin_count8
Input Voltage36V
Current Limit2A
On State Resistance0.088ohm
Distribution Switch Case StyleSOIC
No. of Pins8Pins
Thermal ProtectionYes
On / Enable Input PolarityActive Low
No. of Outputs1Outputs
Operating Temperature Min-40°C
Operating Temperature Max125°C
PackagingCut Tape
Product Range-
Automotive Qualification Standard-
RoHS Phthalates CompliantYes
MSLMSL 1 - Unlimited
SVHCNo SVHC (15-Jun-2015)
Internal SwitchYes
Operating Temperature Range-40°C to +125°C
Power Dissipation Pd1W
Показать остальные свойства..

Аналоги